This is the mail archive of the
cygwin@cygwin.com
mailing list for the Cygwin project.
Reading a Solaris tape created by ufsdump
- From: "Meier, Daniel W." <DANIEL dot W dot MEIER at saic dot com>
- To: "'cygwin at cygwin dot com'" <cygwin at cygwin dot com>
- Date: Thu, 26 Jun 2003 18:22:55 -0700
- Subject: Reading a Solaris tape created by ufsdump
Any hints on how to get the files off of a SDLT tape created by Solaris
ufsdump?
I can access the tape handily:
$ mt -f /dev/st0 status 3
tape capacity : 34571200 KB remaining : 34571200 KB
current block : 0 write protected : yes
datcompression : off
min block size : 4 max block size : 16777212
def block size : 8192 cur block size : 0
Features:
---------
hw compression : yes erase on bop only: yes
hw err correction: no erase immediately: no
sw eject media : no long erase op : yes
write protection : yes short erase op : no
fixed length blks: yes fixed partitions : no
var length blks : yes select partitions: no
get abs blockaddr: yes returns capacity : yes
get log blockaddr: yes returns remaining: yes
data padding : no report setmarks : no
rep EOT warn size: no initiator partit.: no
abs blk position : yes abs blk immediate: no
log blk position : yes log blk immediate: no
filemark position: yes rel blk position : yes
end data position: yes reverse position : yes
immediate spacing: no immediate rewind : no
sequential filem.: no sequential setm. : no
set block size : yes set compression. : yes
set hw compress. : no set data padding : no
setmark position : no set report setm. : no
load and unload : yes un/load immediate: no
lock and unlock : yes un/lock immediate: no
tape retension : no retens. immediate: no
write filemarks : yes write setmarks : no
write long filem.: no write marks immed: yes
write shrt filem.: no set EOT warn size: no
and I did the "mt -f /dev/st0 setblk 0"
but what command do I use to pull the data onto disk?
meierd@saic.com
--
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
Problem reports: http://cygwin.com/problems.html
Documentation: http://cygwin.com/docs.html
FAQ: http://cygwin.com/faq/